home *** CD-ROM | disk | FTP | other *** search
- INFA 3000
-
- NOTES: This unit has four NAMS
- The ESN prefix is 152 decimal, 98 hex. (Walker/Technophone/JRC)
- MTC Electronics/Infa: 604-273-6823
-
- PROGRAMING:
-
- 1. Turn power on by pressing FCN, 0. Hold 0 for two seconds.
-
- 2. Enter FCN, FCN, * 9 7 1 6 2 6 *.
-
- 3. Press # to store each data entry.
-
- 4. Press Volume up/down to increment entries.
-
- 5. To complete programing and exit at any time press FCN, END
- (hold for two seconds).
-
- 6. Each NAM can only be programed three times, it is believed that
- the MIN counter can be reset by entering FCN, FCN, * 6 4 6 2 2 5 7.
- If this does not work use an alternate NAM. If more than one NAM
- has the same system ID the phone will automatically select the last
- NAM with the same SIDH.
-
-
- PROGRAMING DATA:
-
- STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
-
- 01 CANNOT BE CHANGED CMT REV NNNN SOFTWARE REVISION
- 02 1 TO 4 NAM SELECT NAM 1 - 4
- 03 00000 - 32767 SIDH SYSTEM ID
- 04 CANNOT BE CHANGED SCM STATION CLASS MARK
- 05 10 DIGITS MIN MIN (AREA CODE & TEL#)
- 06 DO NOT CHANGE IDCCA IPCH FOR A SYSTEM
- 07 DO NOT CHANGE IDCCB IPCH FOR B SYSTEM
- 08 0333 OR 0334 IPCH INITIAL PAGING CHANNEL
- 09 2 DIGITS ACCOLC ACCESS OVERLOAD CLASS
- 10 2 DIGITS GIM GROUP ID (10 IN USA)
- 11 3 DIGITS LOCK A FULL LOCK CODE
- 12 3 DIGITS LOCK B PARTIAL LOCK CODE
- 13 0 OR 1 LC LOCAL USE MARK
- 14 0 OR 1 EX EXTENDED ADDRESS MARK
- 15 0 OR 1 PS PREFERRED SYSTEM
- 16 0 ONLY NSC NON STANDARD CONTROL
- 17 0 OR 1 EE TRANSMIT DTMF
- 18 0 OR 1 REP REPERTORY DIALING
- 19 0 OR 1 HA HORN ALERT
- 20 0 OR 1 HF HANDS FREE
- 21 0 OR 1 IRI ROAM INHIBIT
- 22 0 OR 1 F1 LOCK A ENABLE
- 23 0 OR 1 F2 LOCK B ENABLE
- 24 0 OR 1 F3 ENABLE DIAGNOSTICS MODE
- (display RSSI & channel #
- when FCN 4 is pressed)
- 25 - 29 0 ONLY F4 - F7 NOT USED